View LTP-12088M-03_4518799.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
LED DISPLAY LTP-12088M-03 DATA SHEET
Rev
01
Description
RDR Original Spec
By
Phanomkorn J. July 31, 2008 Phanomkorn J.
02
Change the test condition on page 4-6 to Ip=80mA, 2msec1/8 Duty August 19, 2008 Phanomkorn J.
03
Paper Correction October 15, 2008 Phanomkorn J. NPPR Original Spec December 03, 2008 Phanomkorn J.
A
Add pin on page 2 of 8
January 29, 2009
SPEC. NO.: DATE :
DS30-2008-0184 January 29, 2009
A 0 OF 8
REV. NO. : PAGE NO. :
PART NO.: LTP-12088M-03 BNS-OD-C131/A4
PAGE:
0
of 8
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only FEATURES
1.22 inch (31.0 mm) MATRIX HEIGHT. LOW POWER REQUIREMENT. SINGLE PLANE, WIDE VIEWING ANGLE. SOLID STATE RELIABILITY. 8x8 ARRAY WITH X-Y SELECT. COMPATIBLE WITH USASCII AND EBCDIC CODES. STACKABLE HORIZONTALLY. CATEGORIZED FOR LUMINOUS INTENSITY. LEAD-FREE PACKAGE(ACCORDING TO ROHS)
DESCRIPTION
The LTP-12088M-03 is a 1.22 inch (31.0 mm) matrix height 8 x8 dot matrix display. This device is multi-color applicable display. The AlInGaP Green LED chips, which are made from AlInGaP on GaAs substrate. The AlInGaP Hyper Red LED chips, which are made from AlInGaP on GaAs substrate. The device has black face and white dot color. The product is binned by luminous intensity and dominant wavelength in the red mode of operation.
DEVICE
PART NO. MULTI-COLOR LTP-12088M-03 DESCRIPTION Anode Column Cathode Row
PART NO.: LTP-12088M-03 BNS-OD-C131/A4
PAGE:
1
of 8
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only PACKAGE DIMENSIONS
NOTES: 1. All dimensions are in millimeters. Tolerances are 0.25 mm (0.01") unless otherwise noted. 2. Pin tip's shift tolerance is +/- 0.4 mm. 3. Foreign material on segment 10mils 4. Ink contamination (surface) 20mils 5. Bending1/100 6. Bubble in segment 10mils
INTERNAL CIRCUIT DIAGRAM
PART NO.: LTP-12088M-03 BNS-OD-C131/A4
PAGE:
2
of 8
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only PIN CONNECTION
NO CONNECTION NO 13 CONNECTION CATHODE ROW 4
1 ANODE COLUMN 5 AlInGaP GREEN
2 ANODE COLUMN 5 AlInGaP HYPER RED 14 ANODE COLUMN 4 AlInGaP HYPER RED 3 CATHODE ROW 5 15 ANODE COLUMN 4 AlInGaP GREEN 16 CATHODE ROW 3
4 ANODE COLUMN 6 AlInGaP GREEN
5 ANODE COLUMN 6 AlInGaP HYPER RED 17 ANODE COLUMN 3 AlInGaP HYPER RED 6 CATHODE ROW 6 18 ANODE COLUMN 3 AlInGaP GREEN 19 CATHODE ROW 2
7 ANODE COLUMN 7 AlInGaP GREEN
8 ANODE COLUMN 7 AlInGaP HYPER RED 20 ANODE COLUMN 2 AlInGaP HYPER RED 9 CATHODE ROW 7 21 ANODE COLUMN 2 AlInGaP GREEN 22 CATHODE ROW 1
10 ANODE COLUMN 8 AlInGaP GREEN
11 ANODE COLUMN 8 AlInGaP HYPER RED 23 ANODE COLUMN 1 AlInGaP HYPER RED 12 CATHODE ROW 8 24 ANODE COLUMN 1 AlInGaP GREEN
PART NO.: LTP-12088M-03 BNS-OD-C131/A4
PAGE:
3
of 8
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only ABSOLUTE MAXIMUM RATING AT Ta=25oC
PARAMETER Average Power Dissipation Per Dot Peak Forward Current Per Dot Average Forward Current Per Dot Derating Linear From 25 Per Dot Reverse Voltage Per Dot Operating Temperature Range Storage Temperature Range AlInGaP GREEN 70 60 25 0.28 5 -35 to +105 -35 to +105 UNIT mW mA mA mA/ V
Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C or of temperature unit (during assembly) not over max. temperature rating above.
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC
AlInGaP GREEN PARAMETER Average Luminous Intensity Peak Emission Wavelength Spectral Line Half-Width Dominant Wavelength Forward Voltage any Dot Reverse Current any Dot Luminous Intensity Matching Ratio (Similar Light Area) SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION IV p d VF IR IV-m 9000 22000 571 15 572 2.05 2.3 2.6 2.8 100 2:1 cd nm nm nm V A Ip=80mA, Tp =2 ms, 1/8 Duty IF=20mA IF=20mA IF=20mA IF=20mA IF=80mA VR=5V Ip=80mA Tp =2 ms, 1/8 Duty
Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L'Eclairage) eye-response curve.
PART NO.: LTP-12088M-03 BNS-OD-C131/A4
PAGE:
4
of 8
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only ABSOLUTE MAXIMUM RATING AT Ta=25oC
PARAMETER Average Power Dissipation Per Dot Peak Forward Current Per Dot Average Forward Current Per Dot Derating Linear From 25 Per Dot Reverse Voltage Per Dot Operating Temperature Range Storage Temperature Range AlInGaP HYPER RED 70 90 25 0.28 5 -35 to +105 -35 to +105 UNIT mW mA mA mA/ V
Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C or of temperature unit (during assembly) not over max. temperature rating above.
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC
AlInGaP HYPER RED PARAMETER Average Luminous Intensity Peak Emission Wavelength Spectral Line Half-Width Dominant Wavelength Forward Voltage any Dot Reverse Current any Dot Luminous Intensity Matching Ratio (Similar Light Area) SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION IV p d VF IR IV-m 17000 24000 650 20 639 2.1 2.3 2.6 2.8 100 2:1 cd nm nm nm V A Ip=80mA Tp =2 ms, 1/8 Duty IF=20mA IF=20mA IF=20mA IF=20mA IF=80mA VR=5V Ip=80mA Tp =2 ms, 1/8 Duty
Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L'Eclairage) eye-response curve.
PART NO.: LTP-12088M-03 BNS-OD-C131/A4
PAGE:
5
of 8
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC
Amber = AlInGaP HYPER RED + AlInGaP GREEN PARAMETER Average Luminous Intensity Peak Emission Wavelength Spectral Line Half-Width Dominant Wavelength Forward Voltage any Dot (AlInGap Green) Forward Voltage any Dot (AlInGap Hyper Red) Reverse Current any Dot Luminous Intensity Matching Ratio (Similar Light Area) SYMBOL MIN. TYP. MAX. UNIT IV p d 2800 0 32000 611 17 605 2.05 VF 2.1 IR IV-m 2.6 100 2:1 A 2.6 V IF=20mA VR=5V Ip=80mA Tp =2 ms, 1/8 Duty cd nm nm nm TEST CONDITION Ip=80mA Tp =2 ms, 1/8 Duty IF=20mA IF=20mA IF=20mA IF=20mA
Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L'Eclairage) eye-response curve.
PART NO.: LTP-12088M-03 BNS-OD-C131/A4
PAGE:
6
of 8
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted)
PART NO.: LTP-12088M-03 BNS-OD-C131/A4
PAGE:
7
of 8
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted)
PART NO.: LTP-12088M-03 BNS-OD-C131/A4
PAGE:
8
of 8

▲Up To Search▲

Price & Availability of LTP-12088M-03

	To Download LTP-12088M-03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .